Economy Specifications

Models: 400EE (4 Horse)
Working Diameter: 40 Ft.
Speeds: Remote Controlled 0 MPH to 16 MPH, forward & reverse.
Arms & Mast: Square Structural, seamless tubing. Arm height, 8 ft from ground, arm radius 20 ft. Working width for horses, 8 ft. Length distance 29 ft. minimum, between individual moving screens.
Power Drive System: The Equineciser is a direct drive electrical motor to a speed reduction gearbox. Motors are 3 HP. All motors are hi-torque, heavy duty, thermally protected with auto reset. Unit requires power input of 220 volt single phase. Your breaker panel must have the following: 2-20 amp double pull (for the 220 v input) & 1-20 amp single pull for your Equineciser to work correctly.
Control Panel: All Equinecisers come with control panel that is mounted outside of fencing. Control box includes direction control switch for forward and reverse, speed dial, on/off switch for electrified screens, and emergency safety stop switch.
Enclosure Panels: Centaur’s standard outside fence panels,  7 ft. tall, 6 ft. long, and standard inside fence panels, 7 ft. tall, 6 ft. long; 6 horizontal structural rails, constructed of 1 7/8″ galvanized pipe, with 6 ft. high, welded wire welded to it. The upper exposed 1 ft. has pipe spaced at 6 inches. Four entry/exit gates for horses. Outside perimeter fence takes a maximum of 4 entry/exit gates (or less depending on what you desire), which will have a 6 ft. wide true opening. All gates come with lockable unilatch spring-loaded bullet latches.
Finish on Fence: Standard steel framework of fence panels is galvanized. The framework is of round tubing, with welded wire attached on lower 6 feet.
Options Include: A timer programmable up to 1 hour.
Radius Fencing galvanized or painted.
Roofing Systems – Cantilevered over exercise path, circular roof to cover entire equineciser and exercise path, or rectangular roof. All have a 10 ft. eave height on the outside fence. Call for roof quotes.