|
|
|
| Models: |
300FX (3 Horse), 400FX (4 Horse),
500FX (5 Horse), 600FX (6 Horse) |
| |
|
| Working
Diameter: |
40 to 68 ft depending on choice of
model. Customized
Diameters available. |
| |
|
| Speeds: |
Remote Controlled 0 MPH to 20 MPH,
Forward and Reverse. |
| |
|
| Arms
& Mast: |
Square Structural, seamless tubing. Arm
Height is 8 ft from the ground. Arm Radius is 20 to 34 ft depending
on choice of model. Working
width for horse is 8˘. Length
distance is 32 ft, minimum, between individual moving screens, based
on model & diameter. |
| |
|
| Power
Drive System: |
The Equineciser is a direct drive
electrical motor to a speed reduction gearbox. The motors are 3 HP. All
motors are hi-torque, heavy duty, thermally protected with auto
reset. The unit requires a power
input of 220-volt single phase. Your
breaker panel must have the following: 2
- 20 amp double pull (for the 220V input) & 1 - 20 amp single
pull for your Equineciser to work correctly. |
| |
|
| Remote
Controller: |
All of the Equinecisers come with a
remote control with a directional control switch, for forward &
reverse and an emergency safety stop switch. |
| |
|
| Enclosure
Panels: |
Standard is 7 ft tall, and 8 ft long
outside panels, inside panels are 7 ft. tall and 8 ft. long. Galvanized
welded wire, which is welded to panel frame, and is 6 ft in height,
and spring-loaded latches on each gate panel. The
framework is 1 7/8" round galvanized steel pipe. Gate
panels have a 6 ft. opening. |
| |
|
| Fence Finishing: |
The standard steel framework of the
fence panels comes galvanized. The framework is of round
tubing, with welded wire attached, on the lower 6 feet. |
| |
|
| Included Options
: |
A timer, programmable up to an hour. Rubber
lined panels on the lower 2 feet attached to each panel for soil
retention. Radius
Fencing galvanized or painted. Roofing
Systems - Cantilevered over exercise path, circular roof to cover
entire equineciser and exercise path, or rectangular roof. All
have a 10 ft. eave height on the outside fence. |
| |
|
| Panel
Options:
|
Lower 4˘X 8˘section solid steel, or steel
& wood laminated, or wood (tongue & grove), or extruded
white or tan PVC 2" X 6" panels inserted into steel
framework, or T1-11 & steel laminated. All panels can be lined with
rubber matting on the lower 2 ˝ feet, to aid in soil retention. |
This information
is accurate as of date of publication, but is subject to change without notice.
Send mail to Centaur@equinecisers.com with
any questions or comments
about our products or our website.
Copyright © 2001 ~ 2007,
Centaur Horse Walkers, Inc. ®. Private
Policy
|
|
